Building a rabbit hutch instead of buying a ready-made one not only can save you money, but it can also give you exactly the design you want. Whether you’re looking for an outdoor rabbit hutch or an indoor one, countless DIY hutch plans can help you build one. Unfortunately, it can be hard to find the right DIY rabbit hutch plan for your needs. We’ve done the work for you and found 20 free plans to help you learn how to build a rabbit hutch – the one your rabbit dreams about! Read on for our list of free plans. The 20 DIY Rabbit Hutch Plans

  1. Two-Story Rabbit Hutch Plan, From Rogue Engineer

Check Instruction HereThis two-story rabbit hutch plan from Rogue Engineer allows your bunny to enjoy the grass while having a separate, secure place to sleep and eat. Hardware cloth makes sure your rabbit stays safe from predators.

Skill Level: Advanced

Materials

Wood composite panel 2-inch by 4-inch by 8-foot premium studs 2-inch by 2-inch by 8-foot premium studs 2.5-inch Blue-Kote pocket screws 1.25-inch exterior wood screws 2.5-inch exterior wood screws wood glue hardware cloth

Tools

Pocket hole jig drill miter saw circular saw table saw jigsaw

  1. Sectional Rabbit Hutch Plan, From Instructables

Check Instruction HereThis sectional rabbit hutch plan from Instructables is a great solution if you have multiple bunnies. The whole thing can easily be taken apart and transported around your yard or into a covered shelter as needed.

Skill Level: Moderate

Materials

Pine 2-inch by 3-inch by 8-foot boards 2-inch by 2-inch by 8-foot boards 24-inch by 25-foot welded wire 36-inch by 10-foot roll of ½ wire mesh cloth 2.5-inch decking screws .5-inch staples 2.5-inch narrow zinc-plated hinges .5-inch zinc-plated barrel bolts 4-foot by 8-foot sheets of .5-inch plywood

Tools

Circular saw drill and ⅛-inch bit impact driver hammer staple gun tin snips carpenter square

  1. Kid-Friendly Rabbit Hutch Plan, From Instructables

Check Instruction HereThis kid-friendly rabbit hutch plan from Instructables makes it easy for kids to open the doors to the hutch. No more heavy roofs falling back down on little fingers!

Skill Level: Beginner/Moderate

Materials

4-foot by 8-foot 15/32-inch plywood 8-foot sections of corrugated plastic roofing 8-foot by 16-inch vinyl-coated wire mesh shelves 2-inch by 4-inch by 8-foot boards 1-inch by 2-inch by 8-foot boards 1-inch by 4-inch by 8-foot boards standard hinges shutter hinges door latches knobs screws for corrugated roofing deck screws 

Tools

Power miter saw circular saw drill carpenter square

  1. Simple Rabbit Hutch Plan, From the How to Specialist

Check Instruction HereThis rabbit hutch plan is a simple design from the How to Specialist that still gives your bunny plenty of room. It’s a two-story, so your rabbit can access grass on the bottom-story and have a safe place to sleep on top.

Skill Level: Beginner

Materials

1-inch by 3-inch lumber ¾-inch plywood sheets 1-inch by 2-inch lumber 1.25-inch screws 1.25-inch pocket screws wood glue outdoor glue

Tools

Miter saw jigsaw drill machinery drill bits

  1. DIY Rabbit Hutch and Run, From The Rabbit House

Check Instruction HereThis simple rabbit hutch and run from The Rabbit House gives your bunny plenty of room to run and enjoy the grass. It also gives your bunny a safe place to escape the sun and sleep.

Skill Level: Beginner

Materials

1-inch by 2-inch by 7-foot lumber 25mm screws 3-foot mesh rolls U-shaped staples wood glue 75mm brass hinges hock and eye

Tools

Drill jigsaw drill machinery screwdrivers hammer wire snips drill bits

  1. Rabbit House and Run, From My Outdoor Plans

Check Instruction HereThis rabbit house and run from My Outdoor Plans has plenty of room for multiple bunnies to run around and enjoy the grass. It also has a cute house to keep them sheltered while they eat or sleep.

Skill Level: Beginner/Moderate

Materials

2-inch by 2-inch by 4-foot lumber 2-inch by 2-inch by 8-foot lumber 2-inch by 4-inch by 4-foot lumber ¾-inch plywood sheets 1⅝-inch screws 2½-inch screws

Tools

Drill miter saw drill machinery screwdrivers hammer sander

  1. Rabbit Hutch Made From Wood Pallets, From Mother Earth News — Our Budget Rabbit Cage Plan

Check Instruction HereThis rabbit hutch from Mother Earth News is a great way to use materials that you may already have at home. It’s made from wooden pallets, so there’s no need to buy extra lumber.

Skill Level: Beginner

Materials

Four wooden pallets 30-inch by 10-foot roll of rabbit wire in 14 or 16 gauge 2½-inch wood screws 2-inch wood screws horseshoe nails latch and hinges

Tools

Skill saw or radial saw drill drill machinery hammer crowbar

Related Read: 5 DIY Rabbit Run Plans You Can Build Today (With Pictures)

  1. Slant Roof Rabbit Hutch, From Construct 101

Check Instruction HereThis slant roof rabbit hutch from Construct 101 holds your bunny off the ground for easier access for you to clean the cage or add food and water. It also keeps your bunny safer from predators.

Skill Level: Beginner/Moderate

Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅝-inch exterior siding t1-11 in 4-foot by 8-foot Wire mesh 2½-inch deck screws 1½-inch deck screws Fence staples Door latch Hinges

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Wire cutters

  1. Three-in-One Rabbit Hutch Plan, From Simply Easy DIY

Check Instruction HereThis three-in-one rabbit hutch from Simply Easy DIY makes it easy to raise multiple rabbits in one hutch. You can adjust the plans to increase or decrease the number of units as needed. Skill Level: Moderate Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber 4-foot of hardware cloth, hinges Latch Handle 36-inch by 33-inch corrugated sheet metal Wood screws

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. Cold Weather Rabbit Hutch Plans, From My Casual Homestead

Check Instruction HereThis hutch plan from My Casual Homestead allows you to keep your rabbits outside even when it’s really cold. They’ll stay warm and dry in this large hutch that’s big enough for multiple rabbits. Skill Level: Moderate Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅜-inch by 4-foot by 8-foot plywood sheets 4-foot by 25-foot 14-gauge double-galvanized wire with ½-inch by 1-inch holes ½ gallon of wood waterproofing stain 2½-inch deck screws 1-inch deck/exterior screws ¾-inch staples 24-inch by 24-inch foam board Tin roofing in 4-foot sections 1¼-inch galvanized roofing screws

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander Staple gun

  1. Basic Outdoor Rabbit Hutch, From Garden Plans Free

Check Instruction HereThis simple rabbit hutch plan from Garden Plans Free keeps your bunnies warm and dry outside. The elevated hutch keeps them safe from predators and gives you easier access to their cage. Skill Level: Moderate Materials

1-inch by 6-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅜-inch by 2-foot by 4-foot plywood sheets 14-sq. ft. of tar paper and asphalt shingles Galvanized screws Hinges Latch Chicken wire

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. The Indoor Hutch Transformation, From Instructables

Check Instruction HereThis plan from Instructables shows you how to convert an old end table into a rabbit hutch for the ultimate eco-friendly DIY project. Converting an old piece of furniture also saves you money on lumber and materials. Skill Level: Beginner Materials

½-inch mesh Staples Piano hinge Wood screws 1-inch by ½-inch wood piece

Tools

Drill Drill machinery Screwdrivers Staple gun Sander or sandpaper

  1. Indoor Rabbit Hutch Plan IKEA Hack, From Shona Craven

Check Instruction HereThis rabbit hutch plan is an IKEA hack from the blog of Shona Craven. She shows readers how to repurpose a piece of IKEA furniture and turn it into a custom indoor rabbit hutch. Skill Level: Beginner Materials

Two IKEA HOL storage tables Castors Wire mesh Staples Hardboard Panel pins Linoleum No More Nails Pine strips (14mm by 25mm) Pine strips (14mm by 14mm) Pine edging strips (14mm by 3mm) L-shaped brackets Thumb turns Small basic hinges Corner hinges Closed screw-in hook String Plastic litter tray Shower curtain hooks

Tools

Jigsaw Hacksaw Wire cutters Hammer Screwdrivers Staple gun

  1. Multi-level Rabbit Cage, From Bunny Blurbs

Check Instruction HereThis plan from Bunny Blurbs shows you how to create a multi-level rabbit cage inexpensively. With few materials, you can build an indoor cage for your bunny that will keep it busy and content. Skill Level: Beginner Materials

Two packs of wire ClosetMaid cubes Zip ties Wood planks Carpet Bungee cords

Tools

Utility knife Scissors

  1. Flower Box Outdoor Rabbit Hutch Plan, From Ginger Snap Crafts

Check Instruction HereThis outdoor rabbit hutch plan from Ginger Snap Crafts will look beautiful in your yard and provide a safe place for your bunny. It features an elevated hutch, decorative flower box, and a cottage-style roof. Skill Level: Moderate Materials

FeltBuster High Traction Synthetic Roofing Felt Roofing shingles Cap shingles 1¼-inch galvanized steel roofing nails 1-inch round plastic cap roofing nail 10-foot Aluminum Drip Edge pieces Treated 4×4 post Treated 1×2 and 2×4 and 2×6 boards Wood screws, two rolls galvanized cage wire Staples Hinges Lock

Tools

Drill Drill machinery Wire cutters Metal snippers Hammer Utility knife

  1. Indoor Rabbit Hutch On Wheels, From BuildEazy

Check Instruction HereThis indoor rabbit hutch plan from BuildEazy shows you how to build a hutch that you can move around your house easily. The hutch has wheels like a wheelbarrow, so your bunny can hang out with you wherever you go. Skill Level: Moderate Materials

⅝-inch plywood sheets 2-inch by 2-inch lumber 2¾-inch lumber 1-inch diameter dowel 2½-inch by 3½-inch lumber Hinges 1-inch gap welded mesh Wheels 6-inch bolts Screws Door latches

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. Easy Indoor Rabbit Hutch, From Instructables

Check Instruction HereInstructables This is a simple indoor rabbit hutch plan from . It gives your bunny two levels to explore, and the finished result looks like a piece of furniture. Skill Level: Beginner Materials

½-inch plywood ⅜-inch plywood ½-inch by 1½-inch wood piece ½-inch by 2½-inch wood piece 8-inch by 24-inch wooden ramp Hardware cloth Furniture feet Door latches Door hinges Screws Staples Wood glue Wood finish

Tools

Drill Miter saw Drill machinery Staple gun Clamps

  1. Three-Level Indoor Bunny Hutch, From Brey Family

Check Instruction HereThis three-level indoor bunny hutch plan from Brey Family shows you how to make your own wire rabbit condo. It gives your bunny plenty of room to explore, with different sections that can be used for sleep, eating, and playing. Skill Level: Beginner Materials

Two packs of wire storage cubes Sheet of plywood Zip ties Wooden dowels Spring clamps

Tools

Utility knife Scissors

  1. Multi-story Indoor Rabbit Hutch, From The Rabbit House

Check Instruction HereThis multi-story indoor rabbit hutch plan from The Rabbit House shows you how to make your own bunny condo out of simple materials. This is an inexpensive DIY project that gives your bunny plenty of things to do in different sections of a large cage. Skill Level: Beginner Materials

Two packs of wire storage cubes Sheet of plywood Zip ties Wooden dowels Spring clamps

Tools

Utility knife Scissors

  1. Indoor PVC and Wire Rabbit Hutch, From Raising Rabbits

Check Instruction HereThis indoor PVC frame plan from Raising Rabbits shows you how to make a frame for a wire rabbit cage using inexpensive materials. This elevates the cage off the floor and makes it easier to access your bunny. Skill Level: Beginner Materials

1¼-inch by 7-foot PVC 1-inch by 26-foot PVC PVC caps, PVC L’s PVC T’s, glue 1-inch by 2-inch by 3-foot wire ½-inch by 1-inch by 3-foot wire J clips Door latch

Tools

Utility knife Scissors Wire cutters

We hope that our list of free plans has helped you find the best DIY rabbit hutch plan for your bunny or bunnies! It’s a great way to save money and learn how to build a rabbit hutch customized to your rabbit’s needs! Happy building!

Building a rabbit hutch instead of buying a ready-made one not only can save you money, but it can also give you exactly the design you want. Whether you’re looking for an outdoor rabbit hutch or an indoor one, countless DIY hutch plans can help you build one.

Unfortunately, it can be hard to find the right DIY rabbit hutch plan for your needs. We’ve done the work for you and found 20 free plans to help you learn how to build a rabbit hutch – the one your rabbit dreams about!

Read on for our list of free plans.

The 20 DIY Rabbit Hutch Plans

  1. Two-Story Rabbit Hutch Plan, From Rogue Engineer

Check Instruction HereThis two-story rabbit hutch plan from Rogue Engineer allows your bunny to enjoy the grass while having a separate, secure place to sleep and eat. Hardware cloth makes sure your rabbit stays safe from predators.

  • Skill Level: Advanced

Check Instruction Here

This two-story rabbit hutch plan from Rogue Engineer allows your bunny to enjoy the grass while having a separate, secure place to sleep and eat. Hardware cloth makes sure your rabbit stays safe from predators.

Skill Level: Advanced

  • Wood composite panel

  • 2-inch by 4-inch by 8-foot premium studs

  • 2-inch by 2-inch by 8-foot premium studs

  • 2.5-inch Blue-Kote pocket screws

  • 1.25-inch exterior wood screws

  • 2.5-inch exterior wood screws

  • wood glue

  • hardware cloth

  • Pocket hole jig

  • drill

  • miter saw

  • circular saw

  • table saw

  • jigsaw

  1. Sectional Rabbit Hutch Plan, From Instructables

Check Instruction HereThis sectional rabbit hutch plan from Instructables is a great solution if you have multiple bunnies. The whole thing can easily be taken apart and transported around your yard or into a covered shelter as needed.

  • Skill Level: Moderate

Materials

Pine 2-inch by 3-inch by 8-foot boards 2-inch by 2-inch by 8-foot boards 24-inch by 25-foot welded wire 36-inch by 10-foot roll of ½ wire mesh cloth 2.5-inch decking screws .5-inch staples 2.5-inch narrow zinc-plated hinges .5-inch zinc-plated barrel bolts 4-foot by 8-foot sheets of .5-inch plywood

Tools

Circular saw drill and ⅛-inch bit impact driver hammer staple gun tin snips carpenter square

  1. Kid-Friendly Rabbit Hutch Plan, From Instructables

Check Instruction HereThis kid-friendly rabbit hutch plan from Instructables makes it easy for kids to open the doors to the hutch. No more heavy roofs falling back down on little fingers!

  • Skill Level: Beginner/Moderate

Materials

4-foot by 8-foot 15/32-inch plywood 8-foot sections of corrugated plastic roofing 8-foot by 16-inch vinyl-coated wire mesh shelves 2-inch by 4-inch by 8-foot boards 1-inch by 2-inch by 8-foot boards 1-inch by 4-inch by 8-foot boards standard hinges shutter hinges door latches knobs screws for corrugated roofing deck screws 

Tools

Power miter saw circular saw drill carpenter square

  1. Simple Rabbit Hutch Plan, From the How to Specialist

Check Instruction HereThis rabbit hutch plan is a simple design from the How to Specialist that still gives your bunny plenty of room. It’s a two-story, so your rabbit can access grass on the bottom-story and have a safe place to sleep on top.

  • Skill Level: Beginner

Materials

1-inch by 3-inch lumber ¾-inch plywood sheets 1-inch by 2-inch lumber 1.25-inch screws 1.25-inch pocket screws wood glue outdoor glue

Tools

Miter saw jigsaw drill machinery drill bits

  1. DIY Rabbit Hutch and Run, From The Rabbit House

Check Instruction HereThis simple rabbit hutch and run from The Rabbit House gives your bunny plenty of room to run and enjoy the grass. It also gives your bunny a safe place to escape the sun and sleep.

Materials

1-inch by 2-inch by 7-foot lumber 25mm screws 3-foot mesh rolls U-shaped staples wood glue 75mm brass hinges hock and eye

Tools

Drill jigsaw drill machinery screwdrivers hammer wire snips drill bits

  1. Rabbit House and Run, From My Outdoor Plans

Check Instruction HereThis rabbit house and run from My Outdoor Plans has plenty of room for multiple bunnies to run around and enjoy the grass. It also has a cute house to keep them sheltered while they eat or sleep.

Materials

2-inch by 2-inch by 4-foot lumber 2-inch by 2-inch by 8-foot lumber 2-inch by 4-inch by 4-foot lumber ¾-inch plywood sheets 1⅝-inch screws 2½-inch screws

Tools

Drill miter saw drill machinery screwdrivers hammer sander

  1. Rabbit Hutch Made From Wood Pallets, From Mother Earth News — Our Budget Rabbit Cage Plan

Check Instruction HereThis rabbit hutch from Mother Earth News is a great way to use materials that you may already have at home. It’s made from wooden pallets, so there’s no need to buy extra lumber.

Materials

Four wooden pallets 30-inch by 10-foot roll of rabbit wire in 14 or 16 gauge 2½-inch wood screws 2-inch wood screws horseshoe nails latch and hinges

Tools

Skill saw or radial saw drill drill machinery hammer crowbar

  • Related Read: 5 DIY Rabbit Run Plans You Can Build Today (With Pictures)
  1. Slant Roof Rabbit Hutch, From Construct 101

Check Instruction HereThis slant roof rabbit hutch from Construct 101 holds your bunny off the ground for easier access for you to clean the cage or add food and water. It also keeps your bunny safer from predators.

Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅝-inch exterior siding t1-11 in 4-foot by 8-foot Wire mesh 2½-inch deck screws 1½-inch deck screws Fence staples Door latch Hinges

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Wire cutters

  1. Three-in-One Rabbit Hutch Plan, From Simply Easy DIY

Check Instruction HereThis three-in-one rabbit hutch from Simply Easy DIY makes it easy to raise multiple rabbits in one hutch. You can adjust the plans to increase or decrease the number of units as needed.

Skill Level: Moderate

Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber 4-foot of hardware cloth, hinges Latch Handle 36-inch by 33-inch corrugated sheet metal Wood screws

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. Cold Weather Rabbit Hutch Plans, From My Casual Homestead

Check Instruction HereThis hutch plan from My Casual Homestead allows you to keep your rabbits outside even when it’s really cold. They’ll stay warm and dry in this large hutch that’s big enough for multiple rabbits.

Materials

2-inch by 4-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅜-inch by 4-foot by 8-foot plywood sheets 4-foot by 25-foot 14-gauge double-galvanized wire with ½-inch by 1-inch holes ½ gallon of wood waterproofing stain 2½-inch deck screws 1-inch deck/exterior screws ¾-inch staples 24-inch by 24-inch foam board Tin roofing in 4-foot sections 1¼-inch galvanized roofing screws

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander Staple gun

  1. Basic Outdoor Rabbit Hutch, From Garden Plans Free

Check Instruction HereThis simple rabbit hutch plan from Garden Plans Free keeps your bunnies warm and dry outside. The elevated hutch keeps them safe from predators and gives you easier access to their cage.

Materials

1-inch by 6-inch by 8-foot lumber 2-inch by 2-inch by 8-foot lumber ⅜-inch by 2-foot by 4-foot plywood sheets 14-sq. ft. of tar paper and asphalt shingles Galvanized screws Hinges Latch Chicken wire

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. The Indoor Hutch Transformation, From Instructables

Check Instruction HereThis plan from Instructables shows you how to convert an old end table into a rabbit hutch for the ultimate eco-friendly DIY project. Converting an old piece of furniture also saves you money on lumber and materials.

Skill Level: Beginner

Materials

½-inch mesh Staples Piano hinge Wood screws 1-inch by ½-inch wood piece

Tools

Drill Drill machinery Screwdrivers Staple gun Sander or sandpaper

  1. Indoor Rabbit Hutch Plan IKEA Hack, From Shona Craven

Check Instruction HereThis rabbit hutch plan is an IKEA hack from the blog of Shona Craven. She shows readers how to repurpose a piece of IKEA furniture and turn it into a custom indoor rabbit hutch.

Materials

Two IKEA HOL storage tables Castors Wire mesh Staples Hardboard Panel pins Linoleum No More Nails Pine strips (14mm by 25mm) Pine strips (14mm by 14mm) Pine edging strips (14mm by 3mm) L-shaped brackets Thumb turns Small basic hinges Corner hinges Closed screw-in hook String Plastic litter tray Shower curtain hooks

Tools

Jigsaw Hacksaw Wire cutters Hammer Screwdrivers Staple gun

  1. Multi-level Rabbit Cage, From Bunny Blurbs

Check Instruction HereThis plan from Bunny Blurbs shows you how to create a multi-level rabbit cage inexpensively. With few materials, you can build an indoor cage for your bunny that will keep it busy and content.

Materials

Two packs of wire ClosetMaid cubes Zip ties Wood planks Carpet Bungee cords

Tools

Utility knife Scissors

  1. Flower Box Outdoor Rabbit Hutch Plan, From Ginger Snap Crafts

Check Instruction HereThis outdoor rabbit hutch plan from Ginger Snap Crafts will look beautiful in your yard and provide a safe place for your bunny. It features an elevated hutch, decorative flower box, and a cottage-style roof.

Materials

FeltBuster High Traction Synthetic Roofing Felt Roofing shingles Cap shingles 1¼-inch galvanized steel roofing nails 1-inch round plastic cap roofing nail 10-foot Aluminum Drip Edge pieces Treated 4×4 post Treated 1×2 and 2×4 and 2×6 boards Wood screws, two rolls galvanized cage wire Staples Hinges Lock

Tools

Drill Drill machinery Wire cutters Metal snippers Hammer Utility knife

  1. Indoor Rabbit Hutch On Wheels, From BuildEazy

Check Instruction HereThis indoor rabbit hutch plan from BuildEazy shows you how to build a hutch that you can move around your house easily. The hutch has wheels like a wheelbarrow, so your bunny can hang out with you wherever you go.

Materials

⅝-inch plywood sheets 2-inch by 2-inch lumber 2¾-inch lumber 1-inch diameter dowel 2½-inch by 3½-inch lumber Hinges 1-inch gap welded mesh Wheels 6-inch bolts Screws Door latches

Tools

Drill Miter saw Drill machinery Screwdrivers Hammer Sander

  1. Easy Indoor Rabbit Hutch, From Instructables

Check Instruction HereInstructables

Materials

½-inch plywood ⅜-inch plywood ½-inch by 1½-inch wood piece ½-inch by 2½-inch wood piece 8-inch by 24-inch wooden ramp Hardware cloth Furniture feet Door latches Door hinges Screws Staples Wood glue Wood finish

Tools

Drill Miter saw Drill machinery Staple gun Clamps

  1. Three-Level Indoor Bunny Hutch, From Brey Family

Check Instruction HereThis three-level indoor bunny hutch plan from Brey Family shows you how to make your own wire rabbit condo. It gives your bunny plenty of room to explore, with different sections that can be used for sleep, eating, and playing.

Materials

Two packs of wire storage cubes Sheet of plywood Zip ties Wooden dowels Spring clamps

Tools

Utility knife Scissors

  1. Multi-story Indoor Rabbit Hutch, From The Rabbit House

Check Instruction HereThis multi-story indoor rabbit hutch plan from The Rabbit House shows you how to make your own bunny condo out of simple materials. This is an inexpensive DIY project that gives your bunny plenty of things to do in different sections of a large cage.

  1. Indoor PVC and Wire Rabbit Hutch, From Raising Rabbits

Check Instruction HereThis indoor PVC frame plan from Raising Rabbits shows you how to make a frame for a wire rabbit cage using inexpensive materials. This elevates the cage off the floor and makes it easier to access your bunny.

Skill Level: Beginner

Materials

1¼-inch by 7-foot PVC 1-inch by 26-foot PVC PVC caps, PVC L’s PVC T’s, glue 1-inch by 2-inch by 3-foot wire ½-inch by 1-inch by 3-foot wire J clips Door latch

Tools

Utility knife Scissors Wire cutters

We hope that our list of free plans has helped you find the best DIY rabbit hutch plan for your bunny or bunnies! It’s a great way to save money and learn how to build a rabbit hutch customized to your rabbit’s needs!

This sectional rabbit hutch plan from Instructables is a great solution if you have multiple bunnies. The whole thing can easily be taken apart and transported around your yard or into a covered shelter as needed.

  • Pine 2-inch by 3-inch by 8-foot boards

  • 2-inch by 2-inch by 8-foot boards

  • 24-inch by 25-foot welded wire

  • 36-inch by 10-foot roll of ½ wire mesh cloth

  • 2.5-inch decking screws

  • .5-inch staples

  • 2.5-inch narrow

  • zinc-plated hinges

  • .5-inch zinc-plated barrel bolts

  • 4-foot by 8-foot sheets of .5-inch plywood

  • Circular saw

  • drill and ⅛-inch bit

  • impact driver

  • hammer

  • staple gun

  • tin snips

  • carpenter square

This kid-friendly rabbit hutch plan from Instructables makes it easy for kids to open the doors to the hutch. No more heavy roofs falling back down on little fingers!

Skill Level: Beginner/Moderate

  • 4-foot by 8-foot 15/32-inch plywood

  • 8-foot sections of corrugated plastic roofing

  • 8-foot by 16-inch vinyl-coated wire mesh shelves

  • 2-inch by 4-inch by 8-foot boards

  • 1-inch by 2-inch by 8-foot boards

  • 1-inch by 4-inch by 8-foot boards

  • standard hinges

  • shutter hinges

  • door latches

  • knobs

  • screws for corrugated roofing

  • deck screws

  • Power miter saw

  • circular saw

  • drill

  • carpenter square

This rabbit hutch plan is a simple design from the How to Specialist that still gives your bunny plenty of room. It’s a two-story, so your rabbit can access grass on the bottom-story and have a safe place to sleep on top.

  • 1-inch by 3-inch lumber

  • ¾-inch plywood sheets

  • 1-inch by 2-inch lumber

  • 1.25-inch screws

  • 1.25-inch pocket screws

  • wood glue

  • outdoor glue

  • Miter saw

  • jigsaw

  • drill machinery

  • drill bits

This simple rabbit hutch and run from The Rabbit House gives your bunny plenty of room to run and enjoy the grass. It also gives your bunny a safe place to escape the sun and sleep.

  • 1-inch by 2-inch by 7-foot lumber

  • 25mm screws

  • 3-foot mesh rolls

  • U-shaped staples

  • wood glue

  • 75mm brass hinges

  • hock and eye

  • Drill

  • jigsaw

  • drill machinery

  • screwdrivers

  • hammer

  • wire snips

  • drill bits

This rabbit house and run from My Outdoor Plans has plenty of room for multiple bunnies to run around and enjoy the grass. It also has a cute house to keep them sheltered while they eat or sleep.

  • 2-inch by 2-inch by 4-foot lumber

  • 2-inch by 2-inch by 8-foot lumber

  • 2-inch by 4-inch by 4-foot lumber

  • ¾-inch plywood sheets

  • 1⅝-inch screws

  • 2½-inch screws

  • Drill

  • miter saw

  • drill machinery

  • screwdrivers

  • hammer

  • sander

This rabbit hutch from Mother Earth News is a great way to use materials that you may already have at home. It’s made from wooden pallets, so there’s no need to buy extra lumber.

  • Four wooden pallets

  • 30-inch by 10-foot roll of rabbit wire in 14 or 16 gauge

  • 2½-inch wood screws

  • 2-inch wood screws

  • horseshoe nails

  • latch and hinges

  • Skill saw or radial saw

  • drill

  • drill machinery

  • hammer

  • crowbar

This slant roof rabbit hutch from Construct 101 holds your bunny off the ground for easier access for you to clean the cage or add food and water. It also keeps your bunny safer from predators.

  • 2-inch by 4-inch by 8-foot lumber

  • 2-inch by 2-inch by 8-foot lumber

  • ⅝-inch exterior siding t1-11 in 4-foot by 8-foot

  • Wire mesh

  • 2½-inch deck screws

  • 1½-inch deck screws

  • Fence staples

  • Door latch

  • Hinges

  • Drill

  • Miter saw

  • Drill machinery

  • Screwdrivers

  • Hammer

  • Wire cutters

This three-in-one rabbit hutch from Simply Easy DIY makes it easy to raise multiple rabbits in one hutch. You can adjust the plans to increase or decrease the number of units as needed.

  • 2-inch by 4-inch by 8-foot lumber

  • 2-inch by 2-inch by 8-foot lumber

  • 4-foot of hardware cloth, hinges

  • Latch

  • Handle

  • 36-inch by 33-inch corrugated sheet metal

  • Wood screws

  • Drill

  • Miter saw

  • Drill machinery

  • Screwdrivers

  • Hammer

  • Sander

This hutch plan from My Casual Homestead allows you to keep your rabbits outside even when it’s really cold. They’ll stay warm and dry in this large hutch that’s big enough for multiple rabbits.

  • 2-inch by 4-inch by 8-foot lumber

  • 2-inch by 2-inch by 8-foot lumber

  • ⅜-inch by 4-foot by 8-foot plywood sheets

  • 4-foot by 25-foot 14-gauge double-galvanized wire with ½-inch by 1-inch holes

  • ½ gallon of wood waterproofing stain

  • 2½-inch deck screws

  • 1-inch deck/exterior screws

  • ¾-inch staples

  • 24-inch by 24-inch foam board

  • Tin roofing in 4-foot sections

  • 1¼-inch galvanized roofing screws

  • Drill

  • Miter saw

  • Drill machinery

  • Screwdrivers

  • Hammer

  • Sander

  • Staple gun

This simple rabbit hutch plan from Garden Plans Free keeps your bunnies warm and dry outside. The elevated hutch keeps them safe from predators and gives you easier access to their cage.

  • 1-inch by 6-inch by 8-foot lumber
  • 2-inch by 2-inch by 8-foot lumber
  • ⅜-inch by 2-foot by 4-foot plywood sheets
  • 14-sq. ft. of tar paper and asphalt shingles
  • Galvanized screws
  • Hinges
  • Latch
  • Chicken wire

This plan from Instructables shows you how to convert an old end table into a rabbit hutch for the ultimate eco-friendly DIY project. Converting an old piece of furniture also saves you money on lumber and materials.

  • ½-inch mesh

  • Staples

  • Piano hinge

  • Wood screws

  • 1-inch by ½-inch wood piece

  • Drill

  • Drill machinery

  • Screwdrivers

  • Staple gun

  • Sander or sandpaper

This rabbit hutch plan is an IKEA hack from the blog of Shona Craven. She shows readers how to repurpose a piece of IKEA furniture and turn it into a custom indoor rabbit hutch.

  • Two IKEA HOL storage tables

  • Castors

  • Wire mesh

  • Staples

  • Hardboard

  • Panel pins

  • Linoleum

  • No More Nails

  • Pine strips (14mm by 25mm)

  • Pine strips (14mm by 14mm)

  • Pine edging strips (14mm by 3mm)

  • L-shaped brackets

  • Thumb turns

  • Small basic hinges

  • Corner hinges

  • Closed screw-in hook

  • String

  • Plastic litter tray

  • Shower curtain hooks

  • Jigsaw

  • Hacksaw

  • Wire cutters

  • Hammer

  • Screwdrivers

  • Staple gun

This plan from Bunny Blurbs shows you how to create a multi-level rabbit cage inexpensively. With few materials, you can build an indoor cage for your bunny that will keep it busy and content.

  • Two packs of wire ClosetMaid cubes

  • Zip ties

  • Wood planks

  • Carpet

  • Bungee cords

  • Utility knife

  • Scissors

This outdoor rabbit hutch plan from Ginger Snap Crafts will look beautiful in your yard and provide a safe place for your bunny. It features an elevated hutch, decorative flower box, and a cottage-style roof.

  • FeltBuster High Traction Synthetic Roofing Felt

  • Roofing shingles

  • Cap shingles

  • 1¼-inch galvanized steel roofing nails

  • 1-inch round plastic cap roofing nail

  • 10-foot Aluminum Drip Edge pieces

  • Treated 4×4 post

  • Treated 1×2 and 2×4 and 2×6 boards

  • Wood screws, two rolls galvanized cage wire

  • Staples

  • Hinges

  • Lock

  • Drill

  • Drill machinery

  • Wire cutters

  • Metal snippers

  • Hammer

  • Utility knife

This indoor rabbit hutch plan from BuildEazy shows you how to build a hutch that you can move around your house easily. The hutch has wheels like a wheelbarrow, so your bunny can hang out with you wherever you go.

  • ⅝-inch plywood sheets

  • 2-inch by 2-inch lumber

  • 2¾-inch lumber

  • 1-inch diameter dowel

  • 2½-inch by 3½-inch lumber

  • Hinges

  • 1-inch gap welded mesh

  • Wheels

  • 6-inch bolts

  • Screws

  • Door latches

  • ½-inch plywood

  • ⅜-inch plywood

  • ½-inch by 1½-inch wood piece

  • ½-inch by 2½-inch wood piece

  • 8-inch by 24-inch wooden ramp

  • Hardware cloth

  • Furniture feet

  • Door latches

  • Door hinges

  • Screws

  • Staples

  • Wood glue

  • Wood finish

  • Drill

  • Miter saw

  • Drill machinery

  • Staple gun

  • Clamps

This three-level indoor bunny hutch plan from Brey Family shows you how to make your own wire rabbit condo. It gives your bunny plenty of room to explore, with different sections that can be used for sleep, eating, and playing.

  • Two packs of wire storage cubes
  • Sheet of plywood
  • Zip ties
  • Wooden dowels
  • Spring clamps

This multi-story indoor rabbit hutch plan from The Rabbit House shows you how to make your own bunny condo out of simple materials. This is an inexpensive DIY project that gives your bunny plenty of things to do in different sections of a large cage.

This indoor PVC frame plan from Raising Rabbits shows you how to make a frame for a wire rabbit cage using inexpensive materials. This elevates the cage off the floor and makes it easier to access your bunny.

  • 1¼-inch by 7-foot PVC

  • 1-inch by 26-foot PVC

  • PVC caps, PVC L’s

  • PVC T’s, glue

  • 1-inch by 2-inch by 3-foot wire

  • ½-inch by 1-inch by 3-foot wire

  • J clips

  • Door latch

  • Utility knife

  • Scissors

  • Wire cutters

Happy building!